User's Manual

Multiple SSID 1~3

A multiple SSID is referred to a network name because essentially it is a

name that identifies a wireless network.

Broadcast Network

Name(SSID)

Enable

: This wireless AP will broadcast its SSID to stations.

Disable

: This wireless AP will not broadcast its SSID to stations. If

stations want to connect to this wireless AP, this AP’s SSID should be

known in advance to make a connection.

AP Isolation

Select Enable or Disable to enable this function.

MBSSID AP

Isolation

Select Enable or Disable to enable this function.

BSSID

Shows the MAC address of the Wireless Router.

Frequency (Channel)

Select 1~11 or Auto Select from the pull-down menu.

HT Physical Mode

Channel Band Width

Select 20 or 20/40. (Default setting is 20/40.)

Guard Interval

Select Long or Auto. (Default setting is Auto.)

MCS

Select form the pull-down menu 0~7 or Auto. (Default setting is Auto.)

Decline BA Request

Select Disable or Enable. (Default setting is Disable.)