User's Manual

26
WPA/ WAP2/ WPA1 WPA2
WPA Algorithms: Select the type of algorithm TKIP or AES for WPA, and
TKIP, AES or TKIP/AES for WPA2, WPA/WPA2.
Key Renewal Interval: Enter the renewal security time (seconds) in the
column. Default is 3600 seconds. Set 0 to disable re-key.
RADIUS Server: RADIUS is an authentication, authorization and
accounting client-server protocol. The client is a Network Access Server that
desires to authenticate its links. The server is a server that has access to a user
database with authentication information.
IP Address: Enter the RADIUS Server’s IP Address provided by your ISP.
Port: Enter the RADIUS Server’s port number provided by your ISP. (The
default is 1812.)
Shared Secret: Enter the password that the Wireless Router shares with the
RADIUS Server.
Session Timeout: Session timeout interval is for 802.1x re-authentication
setting. Set to zero to disable 802.1x re-authentication service for each
session. Session timeout interval unit is second and must be larger than 60.
Idle Timeout: Enter the idle timeout in the column.
* PMK Cache Period: Only valid in WPA2 security
. Set WPA2 PMKID
cache timeout period, after time out, the cached key will be deleted. PMK
Cache Period unit is minute.
* Pre-Authentication: Only valid in WPA2 security
. The most important
features beyond WPA to become standardized through 802.11i/WPA2 are:
pre-authentication, which enables secure fast roaming without noticeable
signal latency.