User's Manual

WPA-PSK/ WAP2-PSK/ WPA-PSK WPA2-PSK

WPA Algorithms: Select the type of algorithm TKIP or AES for WP-PSK,

and TKIP, AES or TKIP/AES for WPA2-PSK, WPA1 PSK WPA2 PSK.

Pass Phrase:

Enter the pass phrase 8~63 ASCII or 64 HEX characters in the

column.

Key Renewal Interval: Enter the renewal security time (seconds) in the

column. Default is 3600 seconds. Set 0 to disable re-key.

802.1x

WEP: Select Disable or Enable to this function.

RADIUS Server: RADIUS is an authentication, authorization and

accounting client-server protocol. The client is a Network Access Server that

desires to authenticate its links. The server is a server that has access to a user

database with authentication information.

IP Address: Enter the RADIUS Server’s IP Address provided by your ISP.

Port: Enter the RADIUS Server’s port number provided by your ISP. (The

default is 1812.)

Shared Secret: Enter the password that the Wireless Router shares with the

RADIUS Server.

Session Timeout: Session timeout interval is for 802.1x re-authentication

setting. Set to zero to disable 802.1x re-authentication service for each

session. Session timeout interval unit is second and must be larger than 60.

Idle Timeout: Enter the idle timeout in the column.