User's Manual

Phy Mode: Select CCK, OFDM, HTMIX or GREENFIELD from the pull-

down menu. Each AP should be setup to the same Phy mode.

AP1~AP4 Encrypt Type: Users should go to the main web page of the

Wireless Router Wireless settings > Security page to set up security mode

under Open, Shared, WEP Auto, WPA, WPA-PSK, WPA2, WPA2-PSK,

WPA-PSK/ WPA2-PSK, WPA/WPA2.

Select NONE, WEP, TKIP and AES encryption type from pull-down

menu. (Default encryption type is NONE.)

Encrypt Key: Enter the corresponding encryption keys in the field.

Select the type of Open, Shared, WEP Auto authentication, for WEP

encryption.

z Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).

z Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).

z ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).

z ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).

Select the type WPA, WPA-PSK, WPA2, WPA2-PSK, WPA-PSK/

WPA2-PSK, WPA/WPA2 authentication, for TKIP or AES encryption.

If users select TKIP or AES encryption, please enter the password in the

Encryption Key column that must be filled with characters longer than 8 and

less than 64 lengths to set up the security.

AP1~AP4 MAC Address: Enter Wireless MAC of each other to make the

WDS connection.