User's Manual

40
Virtual Server
Virtual Server Settings
Virtual Server Settings
Select Enable or Disable from the pull-down menu.
IP Address
Enter the local server’s IP address.
Port Range
For TCP and UDP services enter the beginning of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the start and finish fields.
Protocol
Select the protocol (TCP, UDP or TCP&UDP) used to the remote
system or service.
Comment
Please key in a description for the IP address.
Current Virtual Servers in system
No.
IP address
Port range
Protocol
Here shows the IP address, Port range, Protocol information that
added in the list. The maximum rule count is 32.