User's Manual

42
Administrator Settings
Account
Key in a new login user name in the blank field.
Password
Maximum input is 36 alphanumeric characters (case-sensitive.)
NTP Settings
Current Time
Click Sync with host button to synchronize the time with the host
PC.
Time Zone
Select the time zone area that you located from the pull-down list.
NTP Server
Enter the Network Time Protocol Server here. Ex: time.nist.gov,
ntp0.broad.mit.edu, or time.stdtime.gov.tw.
NTP synchronization
The device will synchronize time with the server according to the
hour(s) that entered.
Green AP
Duration
After the Action (WiFi TX power) be enabled, then the duration time
can be set up. Set up a period of time to enable or disable the wireless
TX function.
Action
Select Disable, WiFi TX power OFF, WiFi TX power 25%, WiFi TX
power 50%, or WiFi TX power 75% from the pull-down menu, to
enable or disable the wireless TX function of the Wireless Router.
DDNS Settings
Dynamic DNS Provider
Select the DNS provider form the pull-down list. DNS provider is a
company that provides access to the internet.
Account
Enter your account that registered in DNS provider website.
Password
Enter passwords that registered.
DDNS
Apply for a Domain Name, and ensure it is allocated to you.
Result
Here shows the DDNS status.
Upload Firmware
Update Firmware
Location
Click the Browse… button, find and open the firmware file (the browser
will display to correct file path) then click Apply to upgrade the Wireless
Router’s firmware.
Notice!
Please DO NOT power OFF the Wireless Router
while upgrading firmware.