User's Manual

Select Disable or Enable from the pull-down menu.

UPNP

Universal Plug and Play (UPnP) is a set of computer protocols promulgated

by the UPnP Forum. The goals of UPnP are to allow devices to connect

seamlessly and to simplify the implementation of networks in the home

(data sharing, communications, and entertainment) and in corporate

environments for simplified installation of computer components. UPnP

achieves this by defining and publishing UPnP device control protocols

built upon open, Internet-based communication standards. The term UPnP

is derived from plug-and-play, a technology for dynamically attaching

devices directly to a computer.

Select Disable or Enable from the pull-down menu.

PPPoE Relay This section is only available in Gateway Mode.

Select Disable or Enable from the pull-down menu.

DNS Proxy

Select Disable or Enable from the pull-down menu.

Apply

After completing the settings on this page, click Apply button to save the

settings.

Cancel

Click Cancel to restore to default values.

VPN Passthrough (GW)

VPN passthrough configurations including: L2TP, IPSec, and PPTP passthrough.

L2TP Passthrough

L2TP, Layer Two Tunneling Protocol (L2TP). Use the L2TP with

VPN that user can access the personal network via Internet.

Select Enabled or Disabled from the pull-down menu.

IPSec Passthrough

IPSec, Internet Protocol Security. Select Enabled or Disabled from

the pull-down menu.

PPTP Passthrough

PPTP, Point-to-Point Tunneling Protocol. Select Enabled or Disabled

from the pull-down menu.