User's Manual

26
Before a station enters power save mode, the station needs the beacon
interval to know when to wake up to receive the beacon. Range 20-
999. (Default Beacon Interval is 100.)
Data Beacon Rate
(DTIM)
Range from 1 to 255. (Default data beacon rate is 1.)
Fragment Threshold
Fragmentation mechanism is used for improving the efficiency when
high traffic flows along in the wireless network. If the Wireless
Router often transmit large files in wireless network, you can enter
new Fragment Threshold value to split the packet. The value can be
set from 256 to 2346. (The default value is 2346.)
RTS Threshold
RTS Threshold is a mechanism implemented to prevent the “Hidden
Node” problem. If the “Hidden Node” problem is an issue, please
specify the packet size. The RTS mechanism will be activated if the
data size exceeds the value you set. (The default value is 2347.)
Warning: Enabling RTS Threshold will cause redundant network
overhead that could negatively affect the throughput performance
instead of providing a remedy.
This value should remain at its default setting of 2347. Should you
encounter inconsistent data flow, only minor modifications of this
value are recommended.
TX Power
Transmit power, the amount of power used by a radio transceiver to
send the signal out.
Short Preamble
Select Disable or Enable this function. (Default setting is Disable.) A
preamble is a signal used in wireless environment to synchronize the
transmitting timing including Synchronization and Start frame
delimiter.
Short Slot
Select Disable or Enable this function. (Default short slot setting is
Enable.)
Tx Burst
Check to enable this function (Default Tx Burst setting is Enable.)
This function enables the Wireless Router to deliver better throughput
during a period of time, it only takes effect when connecting with the
device that supports this function.
Pkt_Aggregate
Select Disable or Enable this function. (Default setting is Enable.)
TX ACK Timeout
ACK time out means "Acknowledgement Time Out", meaning that
the system (the computer on sprint's end) didn't acknowledge your
SMS in the time allotted. This is probably because of a
communication error, and they'll have it fixed soon.
RX ACK Timeout
ACK time out means "Acknowledgement Time Out", meaning that
the system (the computer on sprint's end) didn't acknowledge your
SMS in the time allotted. This is probably because of a
communication error, and they'll have it fixed soon.