User's Manual

Lazy Mode

If Lazy mode be selected, it is unnecessary to set up Wireless MAC address

here, just go to set up Wireless MAC address on the other wireless AP then

WDS function will be active.

Phy Mode: Select CCK(11b mode), OFDM(11g mode), HTMIX(11b/g/n

mixed mode) or GREENFIELD(11n mode) from the pull-down menu. Each

APs should be setup to the same Phy mode.

AP1~AP4 Encrypt Type: Users should go to the main web page of the

Wireless Router Wireless settings > Security page to set up security mode

under Open, Shared, WEP Auto, WPA, WPA-PSK, WPA2, WPA2-PSK,

WPA-PSK/ WPA2-PSK, WPA/WPA2.

Select NONE, WEP, TKIP and AES encryption type from pull-down

menu. (Default encryption type is NONE.)

Encrypt Key: Enter the corresponding encryption keys in the field.

Select the type of Open, Shared, WEP Auto authentication, for WEP

encryption.

z Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).

z Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).