User Manual

3. Connect WAN Cable

Connect the DSL or Cable modem to the WAN port on the Wireless Router. Use the cable

supplied with your DSL/Cable modem. If no cable was supplied, use a standard cable.

4. Power Up

• Power on the Cable or DSL modem.

• Connect the supplied power adapter to the Wireless Router and power up.

Use only the power adapter provided. Using a different one may cause hardware damaged.

5. Check the LEDs

• The Power LED should be ON.

• For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is

also ON.)

• The WAN LED should be ON.

• The WLAN LED should be ON.

For more information, refer to Front-mounted LEDs in Chapter 1.