User Manual

19
Mode You can select AP, Client, WDS or AP+WDS mode as you need.
Under the AP mode, you can click the Multiple AP button to
display the Multiple APs list. Default Multiple AP settings are
enabled.
Network Type Under Client mode this function will be enabled, there is Infra-
structure or Ad hoc type can be selected form the pull-down menu.
SSID
A SSID is referred to a network name because essentially it is a
name that identifies a wireless network.
Channel Width
Select 20MHz channel width, the channel number will be form 1~11
and auto; Select 40Mhz channel width the channel number will be
form 1~9 and auto. Default is 20MHz.
Control Sideband
You can select Lower or Upper form the pull-down list.
Channel Number
The channel number base on the channel width you select. Default
channel is 7.
Broadcast SSID
Enabled
: This wireless AP will broadcast its SSID to stations.
Disabled
: This wireless AP will not broadcast its SSID to stations.
If stations want to connect to this wireless AP, this AP’s SSID
should be known in advance to make a connection.
WMM
The WiFi Multiple Media function is available under 2.4GHz (B),
2.4GHz (G) and 2.4GHz (B+G) band, and is disabled under 2.4GHz
(N), 2.4GHz (G+N) and 2.4GHz (B+G+N) band.
Data Rate
There are several data rate that you can select from the pull-down
menu.
Associated Clients Click Show Active Clients button to show all the listed active
clients.
Enable Mac Clone
(Single Ethernet
Client)
This function will be enabled under Client mode. Check the box to
enable this function.
Enable Universal
Repeater Mode
This function will be disable under WDS mode. Check the box to