User Manual

20
(Acting as AP and
client simultane-
ously)
enable to this function.
SSID of Extended
Interface
When the Enable Universal Repeater Mode (Acting as AP and
client simultaneously) function is enabled, the SSID of Extended
Interface can be entered.
Apply changes After completing the settings on this page, click Apply changes
button to save the settings.
Reset Click Reset to restore to default values.
Advanced Settings
These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. These settings should not be changed unless you know what effect the
changes will have on your Access Point.
Fragment
Threshold
Fragmentation mechanism is used for improving the efficiency
when high traffic flows along in the wireless network. If the
802.11g MIMO Wireless Router often transmit large files in wire-
less network, you can enter new Fragment Threshold value to split
the packet. The value can be set from 256 to 2346. The default
value is 2346.
RTS Threshold
RTS Threshold is a mechanism implemented to prevent the “Hid-
den Node” problem. If the “Hidden Node” problem is an issue,
please specify the packet size. The RTS mechanism will be activated
if the data size exceeds the value you set.
Warning: Enabling RTS Threshold will cause redundant net-
work overhead that could negatively affect the throughput