User Manual

22
button to save the settings.
Reset Click Reset to restore to default values.
Encryption
Disable: (Encryption is set to Disable by default).
If Use 802.1x Authentication is selected, the RADIUS Server
will proceed to check the 802.1x Authentication.
RADIUS Server IP Address: Please enter the RADIUS Server
IP Address in the field.
RADIUS Server Port: Please enter the RADIUS Server Port,
default server port is 1812.
RADIUS Server Password: Please enter RADIUS Server
Password in the field.
WEP
If WEP encryption is selected, users will have to Set WEP keys
either manually or select to Use 802.1x Authentication to make
the RADIUS server to issue the WEP key dynamically.
Wireless WEP Key Setup:
Key Length:
Select the key length from the pull-down menu, either
64-bit or 128-bit.
Key Format: Select Hex if you are using hexadecimal numbers
(0-9, or A-F). Select ASCII if you are using ASCII characters
(case-sensitive).
z Hexadecimal (64-bit): 10 Hex characters (0~9, a-f).
z Hexadecimal (128-bit): 26 Hex characters (0~9, a-f).
z ASCII (64-bit): 5 ASCII characters (case-sensitive).
z ASCII (128-bit): 13 ASCII characters (case-sensitive).
Encryption Key: To configure your WEP settings. WEP (Wired
Equivalent Privacy) encryption can be used to ensure the
security of your wireless network. Fill in the appropriate value or