User Manual

24
RADIUS Server ISP. The default is 1812.
IP Address: Enter the RADIUS Server’s IP Address provided by
your ISP.
Password: Enter the password that the AP shares with the
RADIUS Server.
Apply changes After completing the settings on this page, click Apply changes
button to save the settings.
Reset Click Reset to restore to default values.
Access Control
If you choose 'Allowed Listed', only those clients whose wireless MAC addresses are in the
access control list will be able to connect to your Access Point. When 'Deny Listed' is selected,
these wireless clients on the list will not be able to connect the Access Point.
Wireless Access
Control Mode
Select Allow Listed or Deny List form the pull-down menu to
enable access control function. Default setting is Disable.
MAC Address
Enter the MAC address of a station that is allowed to access this
Access Point.
Comment
You may enter up to 20 characters as a remark to the previous
MAC address.
Apply Changes After completing the settings on this page, click Apply changes
button to save the settings.
Reset Click Reset to restore to default values.
Current Access
Control List
This table displays you the station MAC information.
Delete Selected
Click Delete Selected to delete items which are selected.