User Manual

31
Clone MAC
Address
This table displays you the station MAC information.
Apply Changes After completing the settings on this page, click Apply changes button
to save the settings.
Reset Click Reset to restore to default values.
WAN Interface
This page is used to configure the parameters for Internet network which connects to the WAN
port of your Access Point. Here you may change the access method to static IP, DHCP, PPPoE
or PPTP by click the item value of WAN Access type.
WAN Access Type
Select the WAN Access Type (Static IP, DHCP Client, PPPoE and
PPTP) from the pull-down menu. Default setting is DHCP Client
enabled.
Host Name
Enter the host name in this field.
MTU Size
The most appropriate MTU (Maximum Transmission Unit) namely
the maximum packet size, the default value is 1492 for your applica-