User Manual

34
IP Filtering
Entries in this table are used to restrict certain types of data packets from your local network to
Internet through the Gateway. Use of such filters can be helpful in securing or restricting your
local network.
Enable IP Filtering
Check to enable IP filtering function.
Local IP Address
Enter the local server’s IP address.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system
or service.
Comment
You may key in a description for the port range.
Apply Changes
After completing the settings on this page, click Apply Changes
button to save the settings.
Reset
Click Reset button to restore to default values.
Current Filter
Table
Shows the current IP filter information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.