User Manual

36
Port Forwarding
Entries in this table allow you to automatically redirect common network services to a specific
machine behind the NAT firewall. These settings are only necessary if you wish to host some
sort of server like a web server or mail server on the private local network behind your Gate-
way's NAT firewall.
Enable Port Forward-
ing
Check to enable Port Forwarding function.
IP Address
Enter the IP address in the field.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote
system or service.
Port Range
For TCP and UDP Services, enter the beginning of the range of
port numbers used by the service. If the service uses a single
port number, enter it in both the start and finish fields.
Comment
You may key in a description MAC address.
Apply Changes
After completing the settings on this page, click Apply
Changes button to save the settings.
Reset
Click Reset button to restore to default values.
Current Port Forward-
ing Table
Shows the current Port Forwarding information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.