User's Manual

Chapter 2: About Operation Modes
10
If the PPTP be selected, users have to set up the server IP address, user name
and password according to the ISP that provided the related information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the PPTP Server IP Address in this column.
User Name: Maximum input is 20 alphanumeric characters (case sensitive).
Password: Maximum input is 32 alphanumeric characters (case sensitive).
L2TP
If the L2TP be selected, user have to set up the server IP address, user name
and password according to the ISP that provided the related information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the L2TP Server IP Address in this column.
User Name: Maximum input is 20 alphanumeric characters (case sensitive).
Password: Maximum input is 32 alphanumeric characters (case sensitive).
Step 2- LAN Interface Setup
This step can set up local area network of the Wireless Router, such as IP address, subnet mask, DHCP
type, DHCP IP addresses range, DHCP subnet mask, DHCP DNS, default gateway and DHCP lease
time.