User's Manual

Chapter 2: About Operation Modes
22
Idle Time: It represents that the device will idle after the minutes you set.
The time must be set between 1~1000 minutes. Default value of idle time is
5 minutes. This function will be available when the Connection Type is
selected to Connect on Demand.
MTU Size: The most appropriate MTU (Maximum Transmission Unit)
namely the maximum packet size, the default value is 1460 for your
application. Reducing the packet size can help connecting to certain web
sites or speeding up packet transfer rate. If the incorrect packet size is
entered, you may not be able to open certain web sites.
MAC Clone
Your ISP (Internet Service Provider) may require a particular MAC address
in order for you to connect to the Internet. This MAC address is the PC’s
MAC address that your ISP had originally connected your Internet
connection to. Type in or click Fill my MAC to replace the WAN MAC
address with the MAC address of that PC.
Default setting is Disable. User can select Enable form the pull-down list,
and click Fill my MAC button to fill in your PC’s MAC address in the
blank field.
Enable uPNP…
Check to enable the listed functions.
Apply
After completing the settings on this page, click Apply button to save the
settings.
Cancel
Click Cancel to restore to default values.