User's Manual

Chapter 2: About Operation Modes
23
Advanced Routing
If you connect several routers with this Wireless Router, you may need to set up a predefined routing
rule to have more effective network topology/traffic, this is called static route between those routers
and the Wireless Router.
Enable Dynamic
Route
Check to enable the dynamic route function.
NAT: Select to enable the network address translation function.
Transmit: Select to use the Routing Information Protocol, the function
will select the packet transmitting route that pass through least routers.
Receive: Select to use the Routing Information Protocol, the function will
select the packet receiving route that pass through least routers.
Enable Static
Route
IP address: Enter the Gateway IP address in the field.
Subnet Mask: Enter the Gateway subnet mask here.
Gateway: Enter the gateway name or domain name here.