User's Manual

Chapter 2: About Operation Modes
30
ACL
Wireless Access
Control Mode
Select Allow Listed or Deny Listed form the pull-down menu to enable
access control function. Default setting is Disabled.
MAC Address
Enter the MAC address (12 characters) of a station that is allowed to
access this Access Point.
Comment
You may enter up to 20 characters as a remark to the previous MAC
address.
Current Access
Control List
This table displays you the station MAC information.
Delete Selected
Click Delete Selected to delete items which are selected.
Delete All
Click Delete All to delete all the items.
Reset
Click Reset to rest.
WDS
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet
does. To do this, you must set these APs in the same channel and set MAC address of other APs which
you want to communicate with in the table and then enable the WDS.