User's Manual

Chapter 2: About Operation Modes
35
WPS
Disable WPS
Check the box to disable the WPS function, default setting is enabled.
WPS Status
Here shows the current status of the WPS function. Default setting is
Configured, click Reset to Unconfigured to re-configured the WPS
connection.
Self-PIN Number
Here shows the 8 characters PIN code of the router itself.
Push Button
Configuration
Click Start PBC button to make a WPS connection with client.
Client PIN
Number
Enter the client PIN code into the blank field then click the Start PIN
button to make a WPS connection with client.