User's Manual

Chapter 3: Configuration

Step 2- Time Zone Setting

NTP Settings

Enable NTP client

update

Check the box to synchronize the time with the host PC.

Automatically Adjust

Daylight Saving

Check the box to automatically adjust daylight saving.

Time Zone

Select the time zone area that you located from the pull-down list.

NTP Server

Enter the Network Time Protocol Server here. Ex: time.nist.gov,

ntp0.broad.mit.edu, or time.stdtime.gov.tw.

Step 3- LAN Interface Setup

IP Address

Shows the IP address of the Wireless Router (Default IP address is

192.168.1.254.)

Subnet Mask

The subnet mask of the Wireless Router (Default subnet mask is

255.255.255.0.)