User's Manual

Chapter 3: Configuration

Pre-Shared Key : Pre-Shared Key serves as a password. Users may key in 8 to 63

characters string if you selected passphrase. Pre-shared key format to set the

passwords or leave it blank, in which the 802.1x Authentication will be activated.

Make sure the same password is used on client's end.

LAN

IP Address

Shows the IP address of the Wireless Router (Default IP address is

192.168.1.254.)

Subnet Mask

The subnet mask of the Wireless Router (Default subnet mask is

255.255.255.0.)

Default Gateway

Enter the Internet default gateway LAN IP address in this column. And, the

default gateway should has a connection with the Internet.

DHCP

Disable: Select to disable this Wireless Router to distribute IP addresses to

connected clients.

Server: Select to enable this Wireless Router to distribute IP Addresses

(DHCP Server) to connected clients. And the following field will be

activated for you to enter the starting IP address.

DHCP Client

Range

The starting address of this local IP network address pool. The pool is a piece

of continuous IP address segment. Keep the default value 192.168.1.33

should work for most cases.

• Maximum: 254. Default value 254 should work for most cases.

Note: If “Continuous IP address poll starts” is set at 192.168.1.33 and the

“Number of IP address in pool” is 254, the device will distribute IP addresses

from 192.168.1.33 to 192.168.1.254 to all the computers in the network that

request IP addresses from DHCP server (Router)