User's Manual

Chapter 3: Configuration
17
Show Client
Click to show Active DHCP Client Table.
Refresh: Click this button to refresh the table.
Close: Click this button to close the window.
Static DHCP
Check the box to enable the Static DHCP function, default setting is disabled.
When set to enabled, user can click Static DHCP button to set the Static
DHCP function.
IP Address: Enter the fixed IP address that DHCP Server assigned to a
certain connected station.
MAC Address: Enter the MAC address of a certain station, and then the
DHCP Server will to distribute a fixed IP address to the station automatically
once they connected.
Comment: You can enter a comment to description above IP address or
MAC address.
Apply Changes: After completing the settings on this page, click Apply
changes button to save the settings.
Reset: Click Reset to restore to default values.
Static DHCP List: Here shows the static IP address that have been assigned
according to the MAC address.
Delete Selected: Click Delete Selected to delete items which are selected.
Delete All: Click Delete All button to delete all the items.
Reset: Click Reset button to rest.
Domain Name
Enter the Domain Name here.
Clone MAC
Address
This table displays you the station MAC information.