User's Manual

Chapter 3: Configuration

Wireless

General Setup

Disable Wireless

LAN Interface

Check to disable the wireless function.

Band

You can choose one mode of the following you need.

z 2.4GHz (B): 802.11b supported rate only.

z 2.4GHz (G): 802.11g supported rate only.

z 2.4GHz (N): 802.11n supported rate only.

z 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.

z 2.4GHz (G+N): 802.11g supported rate and 802.11n supported rate.

z 2.4GHz (B+G+N): 802.11b, 802.11g and 802.11n supported rate.

The default is 2.4GHz (B+G+N) mode.

Mode

Select the AP, Client, WDS or AP+WDS modes from the pull-down

menu.

Network Type

If the mode be set to Client mode that the network type can be set to

Infrastructure or Ad hoc.

SSID

A SSID is referred to a network name because essentially it is a name that

identifies a wireless network.

Channel Width

Select 20MHz/40MHz channel width, the channel number will be form

5~11 and auto; Select 20MHz channel width the channel number will be