User's Manual

Chapter 3: Configuration
21
form 1~11 and auto. Default is 20MHz/40MHz.
Control Sideband
You can select Lower or Upper form the pull-down list.
Channel Number
The channel number base on the channel width you select.
Broadcast SSID
Enabled
: This wireless AP will broadcast its SSID to stations.
Disabled
: This wireless AP will not broadcast its SSID to stations. If
stations want to connect to this wireless AP, this AP’s SSID should be
known in advance to make a connection.
WMM
The WiFi Multiple Media function is available under 2.4GHz (B), 2.4GHz
(G) and 2.4GHz (B+G) band, and is disabled under 2.4GHz (N), 2.4GHz
(G+N) and 2.4GHz (B+G+N) band.
Data Rate
There are several data rate that you can select from the pull-down menu.
Associated Clients
Click Show Active Clients button to show all the listed active clients.
Enable Mac Clone
(Single Ethernet
Client)
This function will be enabled under Client mode.
Advanced Settings
Fragment
Threshold
Fragmentation mechanism is used for improving the efficiency when high
traffic flows along in the wireless network. If the 802.11g MIMO Wireless
Router often transmit large files in wireless network, you can enter new
Fragment Threshold value to split the packet. The value can be set from