User's Manual

Chapter 3: Configuration
24
Key Length: select key length 64-bit or 128-bit.
RADIUS Server IP Address: Enter the RADIUS Server’s IP Address
provided by your ISP.
RADIUS Server Port: Enter the RADIUS Server’s port number
provided by your ISP. The default is 1812.
RADIUS Server Password: Enter the password that the AP shares with
the RADIUS Server.
WPA
Authentication Mode: Personal (Pre-Shared Key).
WPA Cipher Suite: here supported AES only.
Pre-Shared Key Format: There are two formats for choice to set the
Pre-shared key, Passphrase and Hex (64 characters). If Hex is
selected, users will have to enter a 64 characters string. For easier
configuration, the Passphrase (at least 8 characters) format is
recommended.
Pre-Shared Key : Pre-Shared Key serves as a password. Users may
key in 8 to 63 characters string if you selected passphrase. Pre-shared
key format to set the passwords or leave it blank, in which the 802.1x
Authentication will be activated. Make sure the same password is used
on client's end.
WPA2
Authentication Mode: Personal (Pre-Shared Key).