User's Manual

Chapter 3: Configuration
29
Delete Selected
Click Delete Selected to delete the selected AP information.
Delete All
Click Delete All to delete all the items.
Reset
Click Reset to restore the settings.
Access Control
Wireless Access
Control Mode
Select Allow Listed or Deny Listed form the pull-down menu to enable
access control function. Default setting is Disable.
MAC Address
Enter the MAC address of a station that is allowed to access this Access
Point.
Comment
You may enter up to 20 characters as a remark to the previous MAC
address.
Current Access
Control List
This table displays you the station MAC information.
Delete Selected Click Delete Selected to delete items which are selected.
Delete All Click Delete All to delete all the items.
Reset Click Reset to rest.