User's Manual

Chapter 3: Configuration
33
Enable DMZ
Check the box to enable DMZ function. If the DMZ Host Function is
enabled, it means that you set up DMZ host at a particular computer to
be exposed to the Internet so that some applications/software,
especially Internet / online game can have two-way connections.
DMZ Host IP
Address
Enter the IP address of a particular host in your LAN which will
receive all the packets originally going to the WAN port/Public IP
address above.
Note: You need to give your LAN PC clients a fixed/static IP address
for DMZ to work properly.
Apply Changes
After completing the settings on this page, click Apply Changes
button to save the settings.
Reset
Click Reset button to restore to default values.
Virtual Servers
Enable Port Forwarding
Check to enable Port Forwarding function.
IP Address
Enter the IP address in the field.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system
or service.
Port Range
For TCP and UDP Services, enter the beginning of the range of
port numbers used by the service. If the service uses a single port
number, enter it in both the start and finish fields.