User's Manual

2
Chapter 2: About
Operation Modes
This device provides operational applications with Router, AP and Wireless ISP modes, which are
mutually exclusive.
If you want to change the settings in order to perform more advanced configuration or even change the
mode of operation, you can select the mode you desired by the manufacturer as described in the
following sections.
The default setting mode is Router mode.
Router Mode
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is
enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can
be setup in WAN page by using PPPOE, DHCP client, PPTP client , L2TP client or static IP.