User's Manual

Chapter 3: Configuration
5
Chapter 3:
Configuration
Hardware Mounting
The Wireless Router is designed to arrange on a raised flat surface like a file cabinet or a book shelf.
The unit may also be converted for mounting to a wall or ceiling.
1. There are two mounting hooks on the underside.
2. Mark two upper holes on a wall or on a raised flat surface.
3. Drill the appending two screws on the flat surface until only 1/4'' screws is showing.
4. Then, hang the Wireless Router onto the screws.
Note:
Please re-adjust the screws if you cannot hang the Wireless Router onto the screws or if it is loose.