User's Manual
Abocom Systems, Inc. .
User Manual
Revision 1.0 • June 27, 2011 - 8 -
Scan Available Networks
Order profiles
3.1.2.1 Add or Modify a Configuration Profile
To add a new configuration profile, click New on the Profile Management tab. To modify a
configuration profile, select the configuration profile from the Profile list and click Modify.
Then you will see the Management dialog box.
1. Edit the General tab
Profile Name - Please enter the Profile name which identifies the configuration
profile. This name must be unique. Note that the profile names are not case-sensitive.
Client Name - Please enter the Profile name which identifies the client machine.
Network Names (SSIDs) - Please enter the IEEE 802.11 wireless network name.
This field has a maximum limit of 32 characters.
2. Edit the Security tab
Select the Security tab in the screen above, and then you can edit the fields to configure
the profile. To define the security mode, select the radio button of the desired security
mode as follows.
WPA/WPA2: Wi-Fi Protected Access
WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase
802.1x: Enables 802.1x security.
Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on
both the access point and the station. To define shared encryption keys, choose the
Shared Key radio button and click Configure to fill in the Define Shared Keys window.
None: No security (not recommended).
Note:
If the access point which the Adapter is associated has WEP set and the client has WEP
enabled, make sure that Allow Association to Mixed Cells is checked on the Security tab
H to
allow association. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
Note:
Select different Security Options, the configurations are different; you can select the
appropriate security option and configure the exact key as your need.
3. Edit the Advanced tab
This screen below allows you to make advanced configuration for the profile.
Power Save Mode - Please select the power save mode in the drop-down list.