User's Manual

-
26 -
Advanced Tab
Wireless mode
Select wireless mode. There are 802.11B/G/N mixed,
802.11B only and 802.11B/G mixed modes are supported.
Default mode is 802.11B/G/N mixed.
Enable TX Burst
Check to enable this function.
Enable TCP
Window Size
Check to increase the transmission quality. Need to restart
operating system when enable this function.
Fast Roaming at
dBm
Check to set the roaming interval, fast to roaming, setup
by transmits power. Default setting is -70dBm.
Show
Authentication
Status Dialog
When you connect AP with authentication, choose
whether show "Authentication Status Dialog" or not.
Authentication Status Dialog displays the process about
802.1x authentications.
Enable CCX
(Cisco Compatible
extensions)
Check to enable the CCX function.
• Turn on CCKM
• Enable Radio Measurements: Check to enable the
Radio measurement function.
• Non-Serving Measurements limit: User can set channel
measurement every 0~2000 milliseconds. Default is set
to 250 milliseconds.
Apply
Click to apply above settings.