User's Manual
Table Of Contents
Network Connection
IP Address
Note: When assigning IP Addresses to the computers on the network, remember to
have the IP address for each computer set on the same subnet mask. If your
Broadband Router use DHCP technology, however, it won’t be necessary for you to
assign Static IP Address for your computer.
1. To configure a dynamic IP address (i.e. if your broadband Router has the DHCP technology), check
the Obtain an IP Address Automatically option.
2. To configure a fixed IP address (if you broadband Router is not DHCP supported, or when you need
to assign a static IP address), check the Use the following IP address option. Then, enter an IP
address into the empty field; for example, enter 192.168.1.1 in the IP address field, and
255.255.255.0 for the Subnet Mask.
-
8 -