User's Manual

LAN Adapter often transmits large files in wireless network, you can enter
new Fragment Threshold value to split the packet. The value can be set
from 256 to 2346.
Authentication and Encryption tab:
Authentication Type: There are six type of authentication modes including
Open, Shared, WPA, WPA-PSK, WPA2 and WPA2-PSK.
• Open: If your access point/ wireless router is using "Open”
authentication, then the wireless adapter will need to be set to the same
authentication type.
• Shared: Shared key is when both the sender and the recipient share a
secret key.
• WPA/ WPA-PSK/ WPA2/ WPA2-PSK: WPA-PSK offers two
encryption methods, TKIP and AES. Select the type of algorithm, TKIP
or AES and then enter a WPA Shared Key of 8-63 characters in the
WPA Pre-shared Key field.
Encryption Type: For Open and Shared authentication mode, the
selection of encryption type are None and WEP. For WPA, WPA2,
WPA-PSK and WPA2-PSK authentication mode, the encryption type
supports both TKIP and AES.
WPA Pre-shared Key: This blank is the shared secret between AP and
STA. For WPA-PSK and WPA2-PSK authentication mode, this field must
be filled with character longer than 8 and less than 64 lengths.
WEP Key: Only valid when using WEP encryption algorithm. The key
must match with the AP’s key. There are several formats to enter the keys.
• Hexadecimal (128bits): 26 Hex characters (0~9, a~f).
• ASCII (128bits): 13 ASCII characters.
Show Password: Check this box to show the password you entered.
802.1x Setting: When user use radius server to authenticate client
certificate for WPA authentication mode.
802.1x tab:
-
36 -