WU5207 802.11n/b/g compliant 2.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Table of Contents Chapter 1: Introduction 5 5 5 5 5 5 6 7 8 9 9 10 11 11 12 12 12 12 Package Contents How it works System requirements Appearance WU5207 Image Start using Chapter 2: Utility control Utility Form Simple control Update FW Network Setting IP Setting Wireless Setting WiFi Status Refresh Button Save button Close Button -3-
Chapter 1: Introduction Package Contents The following items should be included: z 1pcs WU5207 z 1pcs User manual If any of the above items are damaged or missing, please contact your dealer immediately. Notice: Abocom has the right to exchange the design of package and include items without inform the users. System requirements OS: Windows XP SP2 with administrator privilege. Windows Vista, Windows 7. CPU: Intel Pentium M 1.7Ghz (2005) is workable at 5 frames per second.
Appearance 1 [ WU5207 ] 2 Item Part Description 1 LED Blue LED, indicate the activity signal. 2 USB slot Connector to your NB and PC , support USB2.0 , downward fit USB 1.
Start Using 1. Confirm your NB / PC already power on and work normally. 2. Plug in the WU5207 to your NB. (don’t plug-in before Windows start) Please pay patient to await the NB desktop screen to reveal on the projector or LCD TV which user decided.
Chapter 2: Utility Control When user plug-in the WU5207 to NB or PC, and collocate with WU5207_tool_lite.exe It will show the Utility.
Utility form: 1 2 3 Item 4 5 Part Description 1 Control Window Main Control Window 2 Virtual CD-ROM Device Show the Virtual CD-ROM location 3 Search Search AP in environment 4 Update FW Update WU5207 and VB202 FW 5 Network setting User’s desktop screen resolution 6 Close Close the main Window.
Simple control Update FW : To choice what the FW need be update, and use the “Browse” button to find the correct file path.
Network setting : User could manual the Wireless setting; include the security, searching function in this page.
IP setting: z Mode: WU5207 provide three modes for user choice. STATIC / DHCP / Auto IP. z z z z z IP address: User could manual key-in the IP address. Net mask: User could manual key-in the Net mask address. Gateway: User could manual key-in the Gateway address. MAC address: It is factory default value. Un-changeable. Master DNS: User could manual key-in the Master DNS address. z z z z Slave DNS: User could manual key-in the Slave DNS address. Current IP: It is factory default value. Un-changeable.
WiFi Status: This block will reveal the current WiFi status of WU5207 (Unchangeable). The reveal items include: z z z z WiFi Channel SSID RSSI value SNR Value z z z z z TX OK packet quantity. TX Error packet quantity. RX OK packet quantity. RX Error packet quantity. One Collision value. z z More Collisions value. TX Rate value Refresh Button: User could use this button to side-survey the wireless AP around the range of WU5207 availability searching performance.
REV.
