User's Manual

AC_VI (Access Category Video)
AC_VO (Access Category Voice)
Direct Link Setup
Enable
Check the box to enable Direct Link Setup.
MAC Address
The setting of DLS(Direct Link Setup) indicates as follow:
Fill in the blanks of Direct Link with MAC Address of STA, and the
STA must conform to two conditions:
• Connecting with the same AP that supports DLS feature.
• DLS enabled.
Timeout Value
Timeout Value represents that it disconnect automatically after few
seconds. The value is integer that must be between 0~65535. It
represents that it always connects if the value is zero. Default value of
Timeout Value is 60 seconds.
Apply
Click this button to apply the settings.
Tear Down
Select a direct link STA, then click "Tear Down" button to disconnect the
STA.
WPS
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. The STA as an Enrollee or external Registrar supports the
configuration setup using PIN (Personal Identification Number) configuration method or PBC (Push
Button Configuration) method through an internal or external Registrar.
WPS Tab
WPS AP List
Display the information of surrounding APs with WPS IE from last scan
result. List information included SSID, BSSID, Channel, ID (Device
Password ID), Security-Enabled.
Rescan
Issue a rescan command to wireless NIC to update information on surrounding
wireless network.
Information
Display the information about WPS IE on the selected network. List
information included Authentication Type, Encryption Type, Config Methods,
Device Password ID, Selected Registrar, State, Version, AP Setup Locked,
UUID-E and RF Bands.
PIN Code
8-digit numbers. It is required to enter PIN Code into Registrar when using
PIN method. When STA is Enrollee, you can use "Renew" button to
re-generate new PIN Code.
Config Mode
Select from the pull-down menu to decide the station role-playing as an
-
45 -