User Manual

- 20 -
and then press "Load ". The setting status will then be restored.
Save Current
You may save current setting to profile and add one new item in
"Profile name".
Delete Delete the files in the “Profile name”
Advanced
Setting
Click the Advanced Setting button to configure the following
figure （Refer to the Advanced Setting
part on the next page
to see more information about the Advanced Setting）：
Information
Click the Information button to show the Driver Version, Utility
Version and MAC Address of the system.
User Interface
Language
Select English or Traditional Chinese.
Power Consumption Setting
Continuous Access Mode
(CAM)
When this mode is selected, the power supply will
be normally provided even when there is no
throughput.
Maximum Power-Saving
Mode
When this mode is selected, this device will stay in
power saving mode even when there is high volume
of throughput.
Fast Power-Saving Mode
When this mode is selected, the power mode will
switch between CAM and Maximum Power-Saving
Mode depending on the volume of throughput. The
device driver checks the total bytes (only data
frame) every 4 seconds to decide the power mode.
If the total bytes sent exceed 10k bytes, the device