User Manual

- 26 -
This value should remain at its default setting of
2347. Should you encounter inconsistent data
flow, only minor modifications of this value are
recommended.
Preamble
A preamble is a signal used in wireless
environment to synchronize the transmitting
timing including Synch
ronization and Start
frame delimiter. Select from the pull-
down menu
to change the Preamble type into Long or Short.
MAC Address Filter
Click Setting
and you will see the following
figure. You can select the Filter Type from the
pull-down menu.
Disable：Select to disable the filter function.
Accept：
You can type in 15 MAC addresses by
clicking Change
. If you select Accept, then the
MAC address(es) you type in will be connected
to the AP.
Reject：
You can type in 15 MAC addresses by
clicking Change. If you sele
ct Reject, then the
MAC address(es) you type in will not be
connected to the AP.