User's Manual

- 26 -
Advanced
This Advanced page provides advanced and detailed settings for your wireless
network.
Advanced Tab
Wireless mode
Select wireless mode. There are two modes, 802.11B/G
mix and 802.11B only supported. Default mode is
802.11B/G mix.
Wireless Protection
There are three modes can be selected. AUTO, ON and
OFF.
Tx Rate
Select the transmitting rate you preferred. Default is Auto.
Enable TX Burst
Check this box to enable this function.
Enable TCP
Window Size
Check to increase the transmission quality.
Fast Roaming at
Check to set the roaming interval, fast to roaming, setup
by transmits power.
Show
Authentication
Status Dialog
When you connect AP with authentication, choose
whether show "Authentication Status Dialog" or not.
Authentication Status Dialog displays the process about
802.1x authentications.
Select Your
Country Region
Code
Select your country region code from the pull-down
menu.