User's Manual

- 35 -
Config
SSID
AP name of user type. User also can click Use Mac
Address button to display it. System default is
SoftAP-02.
TX Rate
Select the transmitting rate you preferred. Default is
Auto.
Channel
Manually force the AP using the channel. The
system default is CH 1.
Wireless mode
Select wireless mode. 802.11B/G Mixed, 802.11B
only and 802.11G only modes are supported. System
default is 802.11B/G Mixed.
Use Mac Address
Click this button to replace SSID by MAC address.
Security Setting
Authentication mode and encryption algorithm used
within the AP. The system default is no
authentication and encryption.
Authentication Type: There are five type of
authentication modes including Open, Shared,
WPA-PSK, WPA2-PSK, and
WPA-PSK/WPA2-PSK.
Encryption Type: For open and shared