User's Manual

- 36 -
authentication mode, the selections of encryption
type are Not Use and WEP. For WPA-PSK,
WPA2-PSK, and WPA-PSK/ WPA2-PSK
authentication mode, the encryption type supports
both TKIP and AES.
WPA Pre-shared Key: This is the shared secret
between AP and STA. For WPA-PSK and
WPA2-PSK and WPA-PSK/ WPA2-PSK
authentication mode, this field must be filled with
character longer than 8 and less than 32 lengths.
Group Rekey interval: Only valid when using
WPA-PSK, WPA2-PSK, and WPA-PSK/
WPA2-PSK authentication mode to renew key. User
can set to change by seconds or packets. Default is
600 seconds.
WEP Key: Only valid when using WEP encryption
algorithm. The key must match with the AP’s key.
There are several formats to enter the keys.
• Hexadecimal (64bits): 10 Hex characters.
• Hexadecimal (128bits): 26 Hex characters.
• ASCII (64bits): 5 ASCII characters.
• ASCII (128bits): 13 ASCII characters.
Show Password: Check this box to show the
password you entered.
Country Region
Code
Eight countries to choose. Country channel list:
Classification Range
0: CH1 ~11
1: CH1 ~13
2: CH10 ~11
3: CH10 ~13
4: CH14
5: CH1 ~14
6: CH3 ~9
7: CH5 ~13
Beacon (ms)
The time between two beacons. The system default
is 100 ms.
TX Power
Manually force the AP transmits power from the
pull down list 100%, 75%, 50%, 25% and Lowest.