User's Manual

- 57 -
WPS
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to
simplify the security setup and management of Wi-Fi networks. The STA as an
Enrollee or external Registrar supports the configuration setup using PIN
(Personal Identification Number) configuration method or PBC (Push Button
Configuration) method through an internal or external Registrar.
WPS Tab
WPS AP List
Display the information of surrounding APs with WPS IE
from last scan result. List information included SSID,
BSSID, Channel, ID (Device Password ID),
Security-Enabled.
Rescan
Issue a rescan command to wireless NIC to update
information on surrounding wireless network.
Information
Display the information about WPS IE on the selected
network. List information included Authentication Type,
Encryption Type, Config Methods, Device Password ID,
Selected Registrar, State, Version, AP Setup Locked,
UUID-E and RF Bands.
PIN Code
8-digit numbers. It is required to enter PIN Code into
Registrar using PIN method. When STA is Enrollee, you
can use "Renew" button to re-generate new PIN Code.