User Manual

-
2 -
Physical Details
WPS button
To press the physical WPS button on the Wireless USB Dongle once,
then the LED will start to flash. Please make a connection with another
WPS supported device within 2 minutes.
LED
Off – Power off
Solid Green – When associate with the Access Point or Ad-Hoc wireless
workstation the LED will show solid green.
Blinking Green – Indicate the device is transmitting data through the
Access Point or Ad-Hoc wireless workstation. Also when the PBC button
is pressed, the LED will blink to indicate WPS status that the LED will
blink 2 seconds and off 2 seconds.