User manual

properly. If the PCMCIA Service of OS/2 Warp has
been enabled already, please jump to portion B for
driver installation otherwise please follow the
instructions in the following to install the PCMCIA
Service.
A. Enable PCMCIA Service of OS/2 Warp
1.In the OS/2 Desktop group, double-click on the
OS/2 System icon.
2.Double-click on the System Setup icon.
3.Double-click on the Selective Install icon.
4.Select the PCMCIA Support button.
5.Select PCMCIA system.
For example: select IBM ThinkPad 750
6.Click OK”.
7.Click Install
8.Select the source drive and directory
For Example D:\OS2IMAGE
9.Click Install
10.Click OK
B. Install NDIS2 driver for IBM LAN Server
4.0
-18-