Parts List

2
8. Home Key
- This key is used for entering “Home Armed” mode.
- Press the Home Key for 3 seconds to trigger a fire alarm.
Quick Arm:
- Press the Home Key will enter “Home Armed” mode.
Arm with User PIN Code:
- Enter user PIN Code and press the Home Key will enter “Home Armed” mode.
9. Standby Key
- Press the Standby Key for 3 seconds to trigger a medical alarm.
- Press the Standby Key to exit learning mode.
Disarm with User PIN Code:
- Enter user PIN Code and press the Standby Key will enter “Disarmed” mode.
10. Key
- This key is currently reserved.
11. Key
- This key is currently reserved.
12. Hardware Reset Button
- Use a thin tool such as a SIM card ejector or a paper clip to press the button for over 1 second to reboot the Remote
Keypad.
13. Micro USB Charging Hole
- For connecting to a 5V/1A adapter
Features
 LED Indicator
Mode & Status Visual & Audible Indication
Away mode Away key turns on and Abode logo displays solid orange along
with long beep
Home mode Home key turns on and Abode logo displays solid blue along
with 3 beeps
Standby mode Standby key turns on and Abode logo displays solid white
along with 2 beeps
Standby mode with alarm memory Standby key turns on and Abode logo displays solid white
along with 5 beeps
Alarming Abode logo blinks red until system disarmed
No response from Control Panel Abode logo blinks yellow for 4 times
Wrong user PIN code
Abode logo fast blinks red for 5 times along with 4 beeps
Fault happen when putting system into
Away or Home mode
Abode logo blinks between yellow and white for 2 times along
with 3 beeps
System fault in Standby mode Abode logo fades to yellow and white
System fault in Home mode Abode logo fades to yellow and blue
Battery charging in Home or Standby
mode
Abode logo turns on solid green
*display priority: low battery> battery charging>system fault in
Home mode/system fault in Standby mode
Low battery detected in Home or
Standby mode
Abode logo flashes red twice every 60 seconds.
*display priority: low battery> battery charging>system fault in
Home mode/system fault in Standby mode

 Battery and Low Battery Detection
 The Remote Keypad uses one Lithium 3000mAh 3.7V rechargeable battery as its power source.
 For first time use, it is recommended to let your Remote Keypad charge for at least 4 hours. Users can plug his/her
Micro-USB cable into the Remote Keypad’s Micro-USB port first. Then connect the cable to a 5V 1A USB power adapter
and connect to the wall outlet to charge the rechargeable battery.
 The Remote Keypad can also detect the battery status. When the battery voltage is low, a low battery signal will be sent
along with regular signal transmissions to the Control Panel. If battery voltage detected in “Home Armed” or “Standby”
mode, the Red LED will flash twice every 60 seconds to alert the user.
 When receiving a low battery signal, plug the power cable to charge the Remote Keypad. When the device is fully
charged, a battery restore signal will be sent along with regular signal transmissions to the Control Panel.
 PIR Detection Function
When the alarm system is in Home Armed Mode or Standby Mode, the Remote Keypad will light up if movement is
detected by the IR sensor. All Remote Keypad keys and current mode LED will light up, and Abode logo will display current
mode color accordingly. After 5 seconds, the LEDs will turn OFF automatically.