User's Guide

!
!
For DC-Powered (Security Camera) Setup: !
With the Corded Attachment unplugged from power source, rotate the Camera Body 90
degrees to lock into place on Attachment. Secure bottom security lock screws. Plug USB
power cable into a 5V powered USB Type-A port to power camera, or plug USB power cable
into included AC wall adapter. Plug wall adapter into wall to power camera. !
Step 3. If using Corded Attachment determine best placement of camera before permanently
installing. The camera may be used sitting flat on a surface inside (such as a shelf), or mounted
inside or outside using the included Magnetic Mount. To install the Magnet Mount, use the
included mounting screw to mount the Magnetic Mount metal bracket to a solid surface.
Rotate to lock Magnetic Mount to metal bracket. Confirm the connection is secure, then latch
camera to mount and position to the desired angle. !
Step 4. Supply power to the camera by either turning the circuit breaker back ON, or plugging
in the Corded Attachment USB cable into a 5V USB port. !
8-24V wiring pins
Mounting holes