Use and Care Manual

GBM
GBM MANUFACTURING
INCORPORATED
Unleash Your Mind
California Head Office
1188 S Airport Way
Stockton, CA 95205
Texas Distribution Center
3835 Gulfway Drive
Port Arthur, TX 77642
Florida Distribution Center
924 Lane Avenue North
Jacksonville, FL 32254
1 [phone] Toll Free
1 [phone] Fax
www.GBMglass.com
GBM
GBM
ABOLOS CARE AND MAINTENANCE GUIDE
FOR CERAMIC, NATURAL STONE, AND
GLASS TILE
Ceramic tile is a durable and low-maintenance surface for your walls, floors, and
countertops. It will retain its original beauty and luster for many years with proper
maintenance. A quick wipe with a clean damp cloth or mop helps prevent the buildup
of food, soil, grease, residue, soap, sealers, and liquids. Prompt cleanup will aid in
keeping your ceramic tile surfaces looking their best.
Glass mosaics require low maintenance due to being impervious to moisture and sub-
surface staining. It is recommended the use of low VOC (volatile organic compound),
neutral pH, nonhazardous, and non-polluting products if a stronger cleaning agent is
required. Avoid cleaning solutions containing ammonia, oils, fats, or acids. Follow all
directions provided by the cleaning product manufacturer for proper application,
dilution, and usage. Acids can damage the grout and the tile glaze, and ammonia can
discolor the grout. The entire area should be cleaned and scrubbed with clean water
first, then a cleaning solution if necessary. Apply through the use of a cotton mop,
cloth, sponge, or gentle non-metallic brush. A final rinse with clean water will remove
cleaning solution residue.
For glazed tile floors, sweep or vacuum regularly to remove dirt, rocks, or other gritty
particles. Follow with a mop or sponge dampened with a neutral pH cleaner. Always be
sure to rinse and thoroughly dry the tile surface once cleaning is complete. Tiled
surfaces in your bathroom may require more frequent cleaning due to the buildup of
soap, oils, and hard-water residue. Use a clean damp cloth or sponge with a neutral pH
cleaner and allow it to stand about five minutes before rinsing and drying. Dry with a
towel after each use and leave curtain or door open to facilitate ventilation for moisture
escape. A multipurpose spray cleaner can be used on wall tile areas in residential baths
and showers as long as they meet the criteria detailed above. Always test cleaning
products on a small, discrete area prior to conducting a full cleaning.
Use unsanded grout for all natural stone, metal, or glass tiles. Abrasive materials or
chemicals can scratch the surface of the tile. We recommend using quality silicon
rubber grout floats and sponges during installation. Remove all excess grout
immediately with a damp sponge to prevent grout haze from drying on the tile surface.