User Manual

Please place the NVR far away from the devices that are easy to interfere
the connection, such as microwave oven, TV ect. Make sure the obstacles
between the NVR and the cameras are as few as possible.
As picture shown above, when IPCAM1 is put somewhere out of NVR WIFI
range, and there is IPCAM2 between them with strong WIFI signal, users
can put IPCAM1 close to NVR and power it, setup IPCAM1 repeated by
IPCAM2, and then install IPCAM1 to the presupposed place.
Notes:
The repeater cannot strengthen the WiFi signal, but can extend the WiFi
distance by the IP camera. Set up cascading connection in a reasonable
solution, extend wifi signal transfer distance.
Notes:
Repeater Setup
NVR IPCAM2 IPCAM1
Step 1: Right click -> Video Setup -> Repeater
12
[e-mail]